All Appliance Parts

Supplying Demand SD70-101323-25 70-101323-25 HVAC CCW Fan Blades 20 Inch 2 Blades 27-Degree Pitch

Supplying Demand SD70-101323-32 HVAC CCW Fan Blades 20 Inch 3 Blades 26-Degree Pitch

Supplying Demand SD62-105217-01 62-105217-01 HVAC Integrated Furnace Control Board (IFC)

Supplying Demand SD47-105395-02 47-105395-02 HVAC Control Board

Supplying Demand SD8733941842 8733941842 HVAC Main Control Board Assembly

Supplying Demand SD8733941839 8733941839 HVAC Main Control Board Assembly

Supplying Demand SDTP-CON-2/24/30 TP-CON-2/24/30 HVAC Contactor 2 Pole 24V 30 Amp

Supplying Demand SDTP-CON-3/24/30 TP-CON-3/24/30 HVAC Contactor 3 Pole 24V 30 Amp

Supplying Demand SDDG67-00028A DG67-00028A Range Cap-Motor Convection - Also used on Model Specific Wall Ovens and Microwave Oven Combos.

Supplying Demand SD131-4547-03 131-4547-03 Lawn Mower Mulching Blade 22 inch.

Supplying Demand SDTP-E50-3SP2 TP-E50-3SP2 HVAC Direct Drive Blower Motor 1/2 HP 208/230V 2.7 Amp 1075 RPM 3-Speed 48Y Frame 10µF Capacitor

Supplying Demand SDTP-E75-MHP1 TP-E75-MHP1 HVAC Direct Drive Blower Motor 3/4 HP 115V 1075 RPM 3-Speed 48Y Frame 10MF 370 or 440V Capacitor

Supplying Demand SD51-21964-11 51-21964-11 HVAC Vent Motor with Blades 208/230V motor with nominal 3000 rpm | Includes centrifugal proving switch | Mounting bolt pattern 4-1/4 inch x 4-1/4 inch | Includes three fan blades (3 inch, 3-1/2 inch, and 4 inch diameter)

Supplying Demand SDDL1056 DL1056 HVAC Direct Drive Blower Motor 1/2 HP 115V 1075 RPM

Supplying Demand SDD1056 D1056 HVAC Direct Drive Blower Motor 208-230V 1075 RPM 1/2 HP Phase: Single | Motor Design: Permanent Split Capacitor | HP: 1/2 | RPM: 1,075 | Number of Speeds: 3 | Voltage: 208-230V AC | Full Load Amps: 3.6 A | Frame: 48 | Usable @ 208V: Yes | Usable @ 200V: No | Motor Thermal Protection: Auto | Hz: 60 Hz | Ins. Class: B | Motor Shaft Rotation: CW/CCW | Max. Ambient Temperature: 40 °C | Lead Length: 26 in | Motor Enclosure Design: Open Air-Over | Motor Mounting Type: Ring | Motor Mounting Position: Horizontal | Number of Shafts: 1 | Motor Frame Material: Steel | Shaft Diameter: 1/2 in | Shaft Length: 4-1/2 in | Motor Bearings: Sleeve | Motor Shaft Design: Flat | Overall Length: 9-7/8 in | Length Less Shaft: 5-7/8 in | Mounting Holes: (4) #8-32 | Body Diameter: 5-5/8 in | Bolt Circle Diameter: 5-1/8 in | Stud Size: #8-32 | Ring to Ring Center: 5-7/16 in | Resilient Ring Diameter: 2-1/4 in | Capacitor Required: 2MDV6

Supplying Demand SD6205E 6205E HVAC Direct Drive Blower Motor 208-230V 1075 RPM 1/2 HP

Supplying Demand SD6005E 6005E HVAC Direct Drive Blower Motor 115/230V 1075 RPM 1/2 - 1/5 HP Phase: Single | Motor Design: ECM | HP: 1/2 - 1/5 | RPM: 1,075 | Number of Speeds: 1 | Voltage: 115/230V | Current: 6.7/4.0 A | Frame: 48 | Motor Thermal Protection: None | Hz: 60 Hz | Ins. Class: B | Max. Ambient Temperature: 40 °C | Lead Length: 42 in | Motor Enclosure Design: Open Air-Over | Motor Mounting Type: Belly Band Mount | Shaft Diameter: 1/2 in | Motor Bearings: Ball | Motor Shaft Design: Flat | Body Diameter: 5.6 in.

Supplying Demand SD51-104338-00 HVAC Control Module X-13/ENDURA PRO 230 VOLT 1/2 HP Blank

Supplying Demand SD51-104900-06 51-104900-06 HVAC Module - 3/4 HP - BLANK Blank replacement module for 3/4 HP 230V SelecTech motor series 51-104360-xx. This module can ONLY be used for Gen 2 SelecTech motors, NOT Gen 3 motors. This module is sold “unprogrammed” only. You will need a PROTECH Motor Programming kit PD510011 and U.S. Motors module KIT41 to program and use this part.

Supplying Demand 70-102033-05 HVAC Fan Blade - CCW Fan Blades - 18 in., 3 Blades, 30-Degree Pitch