Products

This is Supplying Demand Gas Micro Leak Detector 1Qt - Detects micro leaks down to 0.79 oz/year, safe of any type of gas

This is Supplying Demand Combustible Material Heat Blocking Gel 1Qt

Supplying Demand RTG20006DU HVAC Water Heater Digital Remote Control Thermostat

Supplying Demand RTG20006DV Water Heater Digital Remote Control Thermostat

Supplying Demand RTG20006DW UMC-117 Wired Main Remote Control for Residential Tankless Gas Water Heaters

Supplying Demand RTG20063DV Tankless Water Heater Insulation Pipe Cover Kit Indoor/Outdoor - Beige

Supplying Demand RTG20151B-1 Tankless Gas Water Heater Stainless Steel Concentric Elbow 45 Degree 3 Inch/5 Inch

Supplying Demand RTG20151Z Tankless Gas Water Heater Concentric Wall Thimble 3 Inch x 5 Inch

Supplying Demand RTG20217DVG Tankless Water Heater Insulation Pipe Cover Kit Indoor/Outdoor - Grey

Supplying Demand RTG20217XG Tankless Gas Water Heater Pipe Cover Kit

Supplying Demand RTG20235C Tankless Gas Water Heater Ignitor Coil Replacement

Supplying Demand S8610U1003 S8610U3009 Furnace Pilot Ignition Control Module Natural Gas or Liquid Propane

Supplying Demand S8910U3000F S8910U3000 Universal Hot Surface Ignition HIS Module for 120VAC Igniter

Universal Hot Surface Ignition Integrated Furnace Control Frequency: 60 Hz | Operating humidity range (% RH): 0% to 95% non-condensing | Operating temperature range (F): -40 F to +175 F | Operating temperature range (C): -40 C to +79 C | Flame failure response time (sec): 2 Seconds max @ 1µA | PrePurge: 30 seconds | PostPurge: 15 seconds | Cool fan on delay: 5 seconds | Cool fan off delay: 0 or 60 seconds | Line voltage: 120 Vac (97-132 Vac) | Low voltage: 24V (18-30 Vac) | Igniter current: 5 A resistive @ 120VAC | Thermostat anticipator setting: (Stage 1 only) 100mA | HSI Warmup time: 17/27 or 30/30 seconds | Trial for ignition: 4, 6, or 8 seconds | Interpurge: 60 seconds | Ignition trials: Three, two retries if flame is not sensed | Number of LEDs: 3 | Heat on fan delay: 30 or 60 seconds | Heat off fan delay: 60, 90, 120, or 180 Seconds | Gas control used with: Any 24Vac redundant, direct ignition gas control rated at 1.5A or less. Honeywell VR8205 recommended | Cooling contactor used with: Any 24Vac contactor rated at 1.0A or less | Induced draft blower load: 2.2FLA / 25LRA max @120Vac | Circulator load: 14.5FLA / 25LRA max @120Vac | Type of fan used with: Standard induction-type circulating fan

Supplying Demand S97012248 97012248 Range Hood Exhaust Fan Motor & Blade Replacement Model Specific Not Universal

Supplying Demand SB08999040 Range Hood Filter Fits 1488587 & AP5616123

Supplying Demand SB100 Shaft Blaster HVAC/R Motor Shaft Cutting Wheel Tool

Supplying Demand SB1 1/2 Inch Quick Connect HVAC Brass Coupler Fitting

Supplying Demand SB1 1/4 Inch Quick Connect HVAC Brass Coupler Fitting

Supplying Demand SB1 3/4 Inch Quick Connect HVAC Brass Coupler Fitting