Products

Supplying Demand Evaporator Condenser Rescue Truck Stock Fan Motor with Cord for Refrigerator Display Vending Machines 115-230 Volt (CCWOSE)

Supplying Demand HVAC Evaporator Condenser Fan Pack 58MM Motor & Fan Blade with Cord 115-230 Volt 250 CFM

Supplying Demand HVAC Evaporator Condenser Rescue Fan Pack 58MM Motor & Fan Blade with Cord 115-230 Volt (360 CFM)

Supplying Demand ECMPRO Universal ECM Tester for Electronically Commutated Motors 24 Inch Leads Includes Carrying Case

Supplying Demand EDT21 Refrigerator Electronic Defrost Timer Universal Replacement 208/240V 15A

Supplying Demand ELEKIT Clothes Dryer Repair Kit 134793511 Idler Pulley 134719300 Belt 5304523155 Rollers

Supplying Demand 2 Pack ETC-111000-000 ETC-111000 Electronic Temperature Control 120 to 240 VAC SPDT Relay With 8 Foot Sensor

Supplying Demand F20555K00AP Microwave Waveguide Cover Replacement

Supplying Demand F2055BP20AP Microwave Wave Guide Cover - Replaces AP7081982

Supplying Demand F271239 18 Inch Flexible Gas Line Kit with Couplings and Shut Off Valve for Heaters Appliances

Supplying Demand F290D9330AP Microwave Turntable Tray Support with Roller Wheel Ring - Replaces AP7063343

Supplying Demand F30189Y00AP Microwave Door Latch - Replaces AP7100731

Supplying Demand F336 Thermostat Guard Key Replacement

Supplying Demand FBG-1 Filter Box Grabber Lift Hoist

HVAC Direct Drive Blower Motor 208-230V 1075 RPM 1/2 to 1/6 HP Phase: Single | Motor Design: Permanent Split Capacitor | HP: 1/2 to 1/6 | RPM: 1,075 | Number of Speeds: 4 | Voltage: 208-230V AC | Full Load Amps: 3.09 A | Frame: 48 | Usable @ 208V: Yes | Usable @ 200V: No | Motor Thermal Protection: Auto | Hz: 60 | Ins. Class: B | Motor Shaft Rotation: CW/CCW | Max. Ambient Temperature: 40 °C | Lead Length: 36 in | Motor Enclosure Design: Open Air-Over | Motor Mounting Type: Stud, Ring, Hole, Band | Motor Mounting Position: Horizontal | Number of Shafts: 1 | Motor Frame Material: Steel | Shaft Diameter: 1/2 in | Shaft Length: 5 in | Motor Bearings: Sleeve | Motor Shaft Design: Flat | Overall Length: 10-3/8 in | Length Less Shaft: 5-7/8 in | Mounting Holes: (4) #8-32 | Body Diameter: 5-5/8 in | Stud Quantity: 4 | Bolt Circle Diameter: 5-3/16 in | Mounting Stud Location: Shaft End | Mounting Stud Length: 5/8 in | Stud Size: #8-32 | Ring to Ring Center: 5-7/16 in | Resilient Ring Diameter: 2-1/4 in

HVAC Multi-HP Replacement Motor 3/4-1/5 HP 1075 RPM 208-230V Application: HVAC/R | Sub Application: Direct Drive Fan/Blower | Phase: Single | Motor Design: Permanent Split Capacitor | HP: 3/4 to 1/5 | RPM: 1,075 | Number of Speeds: 4 | Voltage: 208-230V AC | Full Load Amps: 4 A | Frame: 48 | Usable @ 208V: Yes | Usable @ 200V: No | Motor Thermal Protection: Auto | Hz: 60 Hz | Ins. Class: B | Motor Shaft Rotation: CW/CCW | Max. Ambient Temperature: 40 °C | Lead Length: 36 in | Motor Enclosure Design: Open Air-Over | Motor Mounting Type: Stud, Ring, Hole, Band | Motor Mounting Position: Horizontal | Number of Shafts: 1 | Motor Frame Material: Steel | Shaft Diameter: 1/2 in | Shaft Length: 5 in | Motor Bearings: Ball | Motor Shaft Design: Flat | Overall Length: 10-3/8 in | Length Less Shaft: 5-13/16 in | Mounting Holes: (4) #8-32 | Body Diameter: 5-5/8 in | Stud Quantity: 4 | Bolt Circle Diameter: 5-3/16 in | Mounting Stud Location: Shaft End | Mounting Stud Length: 5/8 in | Stud Size: #8-32 | Ring to Ring Center: 5-7/16 in | Resilient Ring Diameter: 2-1/4 in

HVAC Multi-HP Replacement Motor 1/2-1/6 HP 1075 RPM 115 Volts Application: HVAC/R | Sub Application: Direct Drive Fan/Blower | Phase: Single | Motor Design: Permanent Split Capacitor | HP: 1/2 to 1/6 | RPM: 1,075 | Number of Speeds: 4 | Voltage: 115V AC | Full Load Amps: 7 A | Frame: 48 | Usable @ 208V: No | Usable @ 200V: No | Motor Thermal Protection: Auto | Hz: 60 Hz | Ins. Class: F | Motor Shaft Rotation: CW/CCW | Max. Ambient Temperature: 40 °C | Lead Length: 36 in | Motor Enclosure Design: Open Air-Over | Motor Mounting Type: Stud, Ring, Hole, Band | Motor Mounting Position: Horizontal | Number of Shafts: 1 | Motor Frame Material: Steel | Shaft Diameter: 1/2 in | Shaft Length: 5 in | Motor Bearings: Sleeve | Motor Shaft Design: Flat | Overall Length: 10-3/8 in | Length Less Shaft: 5-7/8 in | Mounting Holes: (4) #8-32 | Body Diameter: 5-5/8 in | Stud Quantity: 4 | Bolt Circle Diameter: 5-3/16 in | Mounting Stud Location: Shaft End | Mounting Stud Length: 5/8 in | Stud Size: #8-32 | Ring to Ring Center: 5-7/16 in | Resilient Ring Diameter: 2-1/4 in

HVAC Multi-HP Replacement Motor 1/5-3/4 HP 1075 RPM 115 Volts Application: HVAC/R | Sub Application: Direct Drive Fan/Blower | Phase: Single | Motor Design: Permanent Split Capacitor | HP: 1/2 to 1/6 | RPM: 1,075 | Number of Speeds: 4 | Voltage: 115V AC | Full Load Amps: 7 A | Frame: 48 | Usable @ 208V: No | Usable @ 200V: No | Motor Thermal Protection: Auto | Hz: 60 Hz | Ins. Class: F | Motor Shaft Rotation: CW/CCW | Max. Ambient Temperature: 40 °C | Lead Length: 36 in | Motor Enclosure Design: Open Air-Over | Motor Mounting Type: Stud, Ring, Hole, Band | Motor Mounting Position: Horizontal | Number of Shafts: 1 | Motor Frame Material: Steel | Shaft Diameter: 1/2 in | Shaft Length: 5 in | Motor Bearings: Sleeve | Motor Shaft Design: Flat | Overall Length: 10-3/8 in | Length Less Shaft: 5-7/8 in | Mounting Holes: (4) #8-32 | Body Diameter: 5-5/8 in | Stud Quantity: 4 | Bolt Circle Diameter: 5-3/16 in | Mounting Stud Location: Shaft End | Mounting Stud Length: 5/8 in | Stud Size: #8-32 | Ring to Ring Center: 5-7/16 in | Resilient Ring Diameter: 2-1/4 in

Supplying Demand FFV3420028S HVAC Vent Fan Louver - Replaces AP7086003

Supplying Demand FLEXCON34-6 HVAC Plumbing Flexible Coupling Connectors - Replaces 1056-075