HVAC Direct Drive Blower Motor 115V 1075 RPM 1/2 HP Phase:Single | Motor Design: Permanent Split Capacitor | HP: 1/2 | RPM: 1,075 | Number of Speeds: 3 | Voltage: 115V AC | Full Load Amps: 7 A | Frame: 48 | Usable @ 208V: No | Usable @ 200V: No | Motor Thermal Protection: Auto | Hz: 60 Hz | Ins. Class: B | Motor Shaft Rotation: CW/CCW | Max. Ambient Temperature: 40 °C | Lead Length: 26 in | Motor Enclosure Design: Open Air-Over | Motor Mounting Type: Ring | Motor Mounting Position: Horizontal | Number of Shafts: 1 | Motor Frame Material: Steel | Shaft Diameter: 1/2 in | Shaft Length: 4-1/2 in | Motor Bearings: Sleeve | Motor Shaft Design: Flat | Overall Length: 10 in | Length Less Shaft: 6 in | Mounting Holes: (4) #8-32 | Body Diameter: 5-5/8 in | Bolt Circle Diameter: 5-1/8 in | Stud Size: #8-32 | Ring to Ring Center: 5-9/16 in | Resilient Ring Diameter: 2-1/4 in | Capacitor Required: 2MDV7

HVAC Torsion Flex Motor Bracket for 5-1/2 Inch Diameter Motors Dimensions: 9-1/2 W x 10-1/4 D x 3-1/4 H Inches

Supplying Demand Evaporator Condenser Rescue Truck Stock Fan Motor with Cord for Refrigerator Display Vending Machines 115-230 Volt (CWOSE)

Supplying Demand Evaporator Condenser Rescue Truck Stock Fan Motor with Cord for Refrigerator Display Vending Machines 115-230 Volt (CCWOSE)

Supplying Demand HVAC Evaporator Condenser Fan Pack 58MM Motor & Fan Blade with Cord 115-230 Volt 250 CFM

Supplying Demand HVAC Evaporator Condenser Rescue Fan Pack 58MM Motor & Fan Blade with Cord 115-230 Volt (360 CFM)

HVAC Direct Drive Blower Motor 208-230V 1075 RPM 1/2 to 1/6 HP Phase: Single | Motor Design: Permanent Split Capacitor | HP: 1/2 to 1/6 | RPM: 1,075 | Number of Speeds: 4 | Voltage: 208-230V AC | Full Load Amps: 3.09 A | Frame: 48 | Usable @ 208V: Yes | Usable @ 200V: No | Motor Thermal Protection: Auto | Hz: 60 | Ins. Class: B | Motor Shaft Rotation: CW/CCW | Max. Ambient Temperature: 40 °C | Lead Length: 36 in | Motor Enclosure Design: Open Air-Over | Motor Mounting Type: Stud, Ring, Hole, Band | Motor Mounting Position: Horizontal | Number of Shafts: 1 | Motor Frame Material: Steel | Shaft Diameter: 1/2 in | Shaft Length: 5 in | Motor Bearings: Sleeve | Motor Shaft Design: Flat | Overall Length: 10-3/8 in | Length Less Shaft: 5-7/8 in | Mounting Holes: (4) #8-32 | Body Diameter: 5-5/8 in | Stud Quantity: 4 | Bolt Circle Diameter: 5-3/16 in | Mounting Stud Location: Shaft End | Mounting Stud Length: 5/8 in | Stud Size: #8-32 | Ring to Ring Center: 5-7/16 in | Resilient Ring Diameter: 2-1/4 in

HVAC Multi-HP Replacement Motor 3/4-1/5 HP 1075 RPM 208-230V Application: HVAC/R | Sub Application: Direct Drive Fan/Blower | Phase: Single | Motor Design: Permanent Split Capacitor | HP: 3/4 to 1/5 | RPM: 1,075 | Number of Speeds: 4 | Voltage: 208-230V AC | Full Load Amps: 4 A | Frame: 48 | Usable @ 208V: Yes | Usable @ 200V: No | Motor Thermal Protection: Auto | Hz: 60 Hz | Ins. Class: B | Motor Shaft Rotation: CW/CCW | Max. Ambient Temperature: 40 °C | Lead Length: 36 in | Motor Enclosure Design: Open Air-Over | Motor Mounting Type: Stud, Ring, Hole, Band | Motor Mounting Position: Horizontal | Number of Shafts: 1 | Motor Frame Material: Steel | Shaft Diameter: 1/2 in | Shaft Length: 5 in | Motor Bearings: Ball | Motor Shaft Design: Flat | Overall Length: 10-3/8 in | Length Less Shaft: 5-13/16 in | Mounting Holes: (4) #8-32 | Body Diameter: 5-5/8 in | Stud Quantity: 4 | Bolt Circle Diameter: 5-3/16 in | Mounting Stud Location: Shaft End | Mounting Stud Length: 5/8 in | Stud Size: #8-32 | Ring to Ring Center: 5-7/16 in | Resilient Ring Diameter: 2-1/4 in

HVAC Multi-HP Replacement Motor 1/2-1/6 HP 1075 RPM 115 Volts Application: HVAC/R | Sub Application: Direct Drive Fan/Blower | Phase: Single | Motor Design: Permanent Split Capacitor | HP: 1/2 to 1/6 | RPM: 1,075 | Number of Speeds: 4 | Voltage: 115V AC | Full Load Amps: 7 A | Frame: 48 | Usable @ 208V: No | Usable @ 200V: No | Motor Thermal Protection: Auto | Hz: 60 Hz | Ins. Class: F | Motor Shaft Rotation: CW/CCW | Max. Ambient Temperature: 40 °C | Lead Length: 36 in | Motor Enclosure Design: Open Air-Over | Motor Mounting Type: Stud, Ring, Hole, Band | Motor Mounting Position: Horizontal | Number of Shafts: 1 | Motor Frame Material: Steel | Shaft Diameter: 1/2 in | Shaft Length: 5 in | Motor Bearings: Sleeve | Motor Shaft Design: Flat | Overall Length: 10-3/8 in | Length Less Shaft: 5-7/8 in | Mounting Holes: (4) #8-32 | Body Diameter: 5-5/8 in | Stud Quantity: 4 | Bolt Circle Diameter: 5-3/16 in | Mounting Stud Location: Shaft End | Mounting Stud Length: 5/8 in | Stud Size: #8-32 | Ring to Ring Center: 5-7/16 in | Resilient Ring Diameter: 2-1/4 in

HVAC Multi-HP Replacement Motor 1/5-3/4 HP 1075 RPM 115 Volts Application: HVAC/R | Sub Application: Direct Drive Fan/Blower | Phase: Single | Motor Design: Permanent Split Capacitor | HP: 1/2 to 1/6 | RPM: 1,075 | Number of Speeds: 4 | Voltage: 115V AC | Full Load Amps: 7 A | Frame: 48 | Usable @ 208V: No | Usable @ 200V: No | Motor Thermal Protection: Auto | Hz: 60 Hz | Ins. Class: F | Motor Shaft Rotation: CW/CCW | Max. Ambient Temperature: 40 °C | Lead Length: 36 in | Motor Enclosure Design: Open Air-Over | Motor Mounting Type: Stud, Ring, Hole, Band | Motor Mounting Position: Horizontal | Number of Shafts: 1 | Motor Frame Material: Steel | Shaft Diameter: 1/2 in | Shaft Length: 5 in | Motor Bearings: Sleeve | Motor Shaft Design: Flat | Overall Length: 10-3/8 in | Length Less Shaft: 5-7/8 in | Mounting Holes: (4) #8-32 | Body Diameter: 5-5/8 in | Stud Quantity: 4 | Bolt Circle Diameter: 5-3/16 in | Mounting Stud Location: Shaft End | Mounting Stud Length: 5/8 in | Stud Size: #8-32 | Ring to Ring Center: 5-7/16 in | Resilient Ring Diameter: 2-1/4 in

HVAC Motor Belly Band Mounting Bracket Kit for 5-1/2 Inch Diameter Motors

Supplying Demand HC21ZE121A Furnace Draft Inducer Motor Replaces JK7702601-1, 0052-1, HC21ZE121

Supplying Demand HC29GE209 HVAC Condenser Motor, 1/15HP, 208-230Vac, 800 RPM, CW Lead End Rotation

Supplying Demand 0131M00002PSP Furnace Exhaust Inducer Draft Motor Replaces N065, 0131M0002P

Supplying Demand 70-24157-03 Furnace Exhaust Inducer Draft Motor Replaces N066

Supplying Demand BLW0889 Furnace Exhaust Draft Inducer Motor Replacement 120V 1/30HP 3000RPM

Supplying Demand B1859005 Furnace Exhaust Inducer Draft Motor Replaces B18590-05, 7002-2307

Supplying Demand 85L49 Furnace Exhaust Inducer Draft Motor Replaces N164

Supplying Demand 1011350 Furnace Exhaust Inducer Draft Motor Replaces N173

Supplying Demand B4059000S Furnace Exhaust Draft Inducer Motor Replacement 115V 1/30HP 3000RPM

Supplying Demand A200 Furnace Exhaust Inducer Draft Motor Replaces 7002-2975, 31L5501

Supplying Demand 69M32 Furnace Exhaust Inducer Draft Motor Replaces N331

HVAC Blower Motor X-13 1/2 HP 5 Speed Cycle/Hertz: 50/60 Hz | Motor HP: 1/2 HP | Motor Type: ECM (Electronically Commutated Motor) | Number of Speeds: 5 (Five) | Phase: Single | Rotation: Reversible | Voltage: 230 VAC

HVAC Direct Drive Blower Motor 1/4 HP 208/230V 1.6 Amp 1075 RPM 3-Speed 48Y Frame 10µF Capacitor Amps: 1.6 | Bearing Type: Self Aligning | Capacitor MFD µF: 10 | Cycle/Hertz: 60 Hz | Duty: Continuous | Full Load Amps: 1.6 | Insulation Class: B | Lead Length: 36" | Motor Enclosure: Open Air Over (OPAO) | Motor HP: 1/4 HP | Motor Type: PSC (Permanent Split Capacitor) | NEMA Frame: 48Y | Number of Bearings: 2 | Number of Poles: 6 | Number of Speeds: 3 (800, 950, 1075) | Phase: Single | Protection: Automatic | Rotation: Reversible | RPM: 1075 | Shaft Diameter: 0.5" (1/2") | Shaft Length: 5" | Voltage: 208-230 VAC

HVAC Direct Drive Blower Motor 1/2 HP 208/230V 2.7 Amp 1075 RPM 3-Speed 48Y Frame 10µF Capacitor Amps: 2.7 | Bearing Type: Self Aligning | Capacitor MFD µF: 10 | Cycle/Hertz: 60 Hz | Duty: Continuous (S1) | Full Load Amps: 2.7 | Insulation Class: B | Lead Length: 36" | Motor Enclosure: Open Air Over (OPAO) | Motor HP: 1/2 HP | Motor Type: PSC (Permanent Split Capacitor) | NEMA Frame: 48Y | Number of Bearings: 2 | Number of Poles: 6 | Number of Speeds: 3 (800, 950, 1075) | Phase: Single | Protection: Automatic | Rotation: Reversible | RPM: 1075 | Shaft Diameter: 0.5" (1/2") | Shaft Length: 5" | Thermal Protection: true | Voltage: 208-230 VAC

HVAC Direct Drive Blower Motor Multi-Horsepower 1/6 - 1/2 HP 115V 1075 RPM 3-Speed Amps: 7.3 | Bearing Type: Self Aligning (SAB) | Capacitor MFD µF: 10 | Cycle/Hertz: 60 Hz | Duty: Continuous (S1) | Full Load Amps: 7.3 | Insulation Class: B | Lead Length: 36" | Motor Enclosure: Open Air Over (OPAO) | Motor HP: 1/6 HP to 1/2 HP | Motor Type: PSC (Permanent Split Capacitor) | NEMA Frame: 48Y | Number of Bearings: 2 | Number of Poles: 6 | Number of Speeds: 4 (800, 950, 1075) | Phase: Single | Protection: Automatic | Rotation: Reversible | RPM: 1075 | Shaft Diameter: 0.5" (1/2") | Shaft Length: 4.4375 | Thermal Protection: true | Voltage: 115 VAC

HVAC Direct Drive Blower Motor 3/4 HP 115V 1075 RPM 3-Speed 48Y Frame 10MF 370 or 440V Capacitor Amps: 8.1 | Bearing Type: Ball | Capacitor MFD µF: 20 | Cycle/Hertz: 60 Hz | Duty: Continuous (S1) | Full Load Amps: 8.1 | Insulation Class: B | Lead Length: 36" | Motor Enclosure: Open Air Over (OPAO) | Motor HP: 3/4 HP | Motor Type: PSC (Permanent Split Capacitor) | NEMA Frame: 48Y | Number of Bearings: 2 | Number of Poles: 6 | Number of Speeds: 4 (800, 950, 1075) | Phase: Single | Protection: Automatic | Rotation: Counter Clockwise (CCW) | RPM: 1075 | Shaft Diameter: 0.5" (1/2") | Shaft Length: 5" | Thermal Protection: true | Voltage: 115 VAC

HVAC Direct Drive Blower Motor 3/4 - 1/5 HP 208/230V 1075 RPM 3-Speed 48Y Frame 20MF 370 or 440V Capacitor Amps: 3.8 | Bearing Type: Ball | Capacitor MFD µF: 20 | Cycle/Hertz: 60 Hz | Duty: Continuous (S1) | Full Load Amps: 3.8 | Insulation Class: B | Lead Length: 36" | Motor Enclosure: Open Air Over (OPAO) | Motor HP: 3/4 HP | Motor Type: PSC (Permanent Split Capacitor) | NEMA Frame: 48Y | Number of Bearings: 2 | Number of Poles: 6 | Number of Speeds: 4 (800, 950, 1075) | Phase: Single | Protection: Automatic | Rotation: Counter Clockwise (CCW) | RPM: 1075 | Shaft Diameter: 0.5" (1/2") | Shaft Length: 5" | Thermal Protection: true | Voltage: 208-230 VAC

HVAC Blower Motor 115/208-230V 1075 RPM 3/4 HP Amps: 4-9.3 | Bearing Type: Ball | Cycle/Hertz: 60 Hz | Duty: Continuous | Motor HP: 3/4 HP | Motor Type: ECM (Electronically Commutated Motor) (X-13) | NEMA Frame: 48Y | Number of Speeds: Variable | Phase: Single | Rotation: Reversible | RPM: 1075 | Shaft Diameter: 0.5" (1/2") | Shaft Length: 5.0" | Voltage: 115/208-230 VAC

Supplying Demand W51-11BDV-04 HVAC Constant Torque Blower Motor 1 Hp Preprogrammed 115V/208-230V Reversing Sensing with Installation Harness

Supplying Demand W51-12CJA1-02 HVAC Condenser Motor 1/2 HP 1 Phase 1 Speed 208/230V 1075 RPM

Supplying Demand W51-13CJA1-02 HVAC Condenser Motor 1/3 HP 1 Phase 1 Speed 208/230V 1075 RPM Must Match Specs of Current Motor to Function Correctly

Supplying Demand W51-14CJA1-02 HVAC Condenser Motor 1/4 HP 1 Phase 1 Speed 208/230V 1075 RPM Must Match Specs of Current Motor to Function Correctly

Supplying Demand W51-14CJJ1-02 HVAC Condenser Motor 1/4 HP 1 Phase 208/230V 825 RPM Model Specific Not Universal

Supplying Demand W51-16CJA1-02 HVAC Condenser Motor 1/6 HP 1 Phase 1 Speed 208/230V 1075 RPM

Supplying Demand W51-16CJJ1-02 HVAC Condenser Motor 1/6 HP 1 Phase 208/230V 825 RPM

Supplying Demand W51-MHCJA1-02 HVAC Condenser Motor 1/6-1/3 HP 1 Phase 1 Speed 208/230V 1075 RPM