Supplying Demand 62-104058-02 Integrated Furnace Control Board (IFC) Kit With 44-ATC3 Fuses

HVAC Integrated Furnace Control Board (IFC)

Supplying Demand 62-22578-01 HVAC Hot Surface Ignition Module Integrated (Through Ignitor) Flame Sensing, 34-Second Pre-Purge

Supplying Demand 62-23599-05 HVAC Integrated Furnace Control Board

Supplying Demand 62-24268-03 Integrated Furnace Control Board (IFC)

HCAV Time Delay Relay 40 Sec Off

HVAC A/C and Heat Pump Circuit Board

Supplying Demand 626-38632 Fuse Adapter 60 to 30 Reducer for Class H, 250V

Supplying Demand 84-25175-05 Disconnect Switch Non-Fused 230V 60A Top Open

Supplying Demand 849039 HVAC Whip Non-Metallic 1/2 Inch x 4 Feet 10 AWG

Supplying Demand 849040 HVAC Whip Non-Metallic 1/2 Inch x 6 Feet 10 AWG Ground 10 AWG Power

HVAC Control Board Control Unit UPM Assembly Kit

HVAC Main Control Board Assembly

HVAC Main Control Board Assembly

HVAC Air Handler Main Control Board

HVAC Outdoor Control Board

HVAC Indoor Control Board

HVAC Air Handler Control Board 208-230 VAC

HVAC Air Handler Control Board B5

HVAC Contactor 40 AMP 2 Pole 24 Volt Contactor type: Definite purpose | Number of poles: 2 | FLA Inductive: 40 | FLA Resistive: 50 | Coil voltage: 24 | Coil Hz: 50/60 | Lug or Screw Terminal: Box lug | Number of QC terminals per pole: 4

HVAC Defrost Control Board Amps: 1 | Contact type: Screws | Control volts: 30 AC | Defrost time max (minutes): 10

HVAC Integrated HSI Control Board - Replaces 624693

HVAC Furnace Control Board

HVAC Dual Fuel Controller PC Board Phase: Single | Stage: Two | Type: Dual Fuel | Voltage: 24 VAC

HVAC Outdoor Thermostat Phase: Single | Stage: Single | Type: Outdoor Control Board | Voltage: 24 VAC

HVAC PCB Main Control Board Assembly

HVAC PCB Control Board

HVAC Control Board WS()C Water Source Heat Pump

HVAC Contactor 40 Amp 1 Pole 24V Definite purpose contactor | Number of poles: 1 | Current rating: 40 Amp | Coil voltage 24 Volt AC | Terminal type: Screw

HVAC Time Delay Relay 0.03 - 10 Minute Make Time 18-230 VAC Current Rating - Inrush (A): 15 | Current Rating - Steady State (A): 1.50 | Electrical Connections: Stripped Wire Leads | Frequency (Hz): 50/60 | Make Time Delay (minutes): 0.03 - 10 | Make Time Delay (seconds): 1.5 - 600 | Time Delay Adjustment: Variable | Type: On Delay on Make | Voltage Rating (VAC): 18-230

HVAC Time Delay Relay - Delay On Break Timer Current Rating - Inrush (A): 15 | Current Rating - Steady State (A): 1.50 | Electrical Connections: Stripped Wire Leads | Frequency (Hz): 50/60 | Make Time Delay (minutes): 0.03 - 10 | Make Time Delay (seconds): 1.5 - 600 | Time Delay Adjustment: Variable | Type: On Delay on Brake | Voltage Rating (VAC): 18-240

HVAC Furnace Control Board 98-132 VAC Line Voltage Range: 98 to 132 VAC @ 60 Hz | Ignitor: 5A @ 120 VAC | Fan: 2 HP @ 240 VAC | Inducer Motor: 7A @ 250 VAC | Gas Valve: 1A @ 24 VAC

Supplying Demand LBK10 Single Phase Surge Protector Residential Light Commercial Applications HVAC

HVAC Power Control Board

HVAC General Purpose Relay DPDT Pilot 3A Power 12A @ 125V 6A @ 250V 4.5A @ 277V 24 V COIL

HVAC Time Delay Relay Power Pole 7 FLA, 36 RLA @ 240VAC Pilot Pole 25 VA @ 24 VAC

HVAC Start Relay 50A Coil 383 Continuous Coil Rating 60 Hz 160-170V Hot Pickup 153-165V Pick Up

HVAC Start Relay 50A Coil 502 Continuous Coil Rating 60 Hz 260-280V Hot Pickup

HVAC Start Relay SPST 35 A Coil 239V Pick Up 135V Drop Out

Universal Hot Surface Ignition Integrated Furnace Control Frequency: 60 Hz | Operating humidity range (% RH): 0% to 95% non-condensing | Operating temperature range (F): -40 F to +175 F | Operating temperature range (C): -40 C to +79 C | Flame failure response time (sec): 2 Seconds max @ 1µA | PrePurge: 30 seconds | PostPurge: 15 seconds | Cool fan on delay: 5 seconds | Cool fan off delay: 0 or 60 seconds | Line voltage: 120 Vac (97-132 Vac) | Low voltage: 24V (18-30 Vac) | Igniter current: 5 A resistive @ 120VAC | Thermostat anticipator setting: (Stage 1 only) 100mA | HSI Warmup time: 17/27 or 30/30 seconds | Trial for ignition: 4, 6, or 8 seconds | Interpurge: 60 seconds | Ignition trials: Three, two retries if flame is not sensed | Number of LEDs: 3 | Heat on fan delay: 30 or 60 seconds | Heat off fan delay: 60, 90, 120, or 180 Seconds | Gas control used with: Any 24Vac redundant, direct ignition gas control rated at 1.5A or less. Honeywell VR8205 recommended | Cooling contactor used with: Any 24Vac contactor rated at 1.0A or less | Induced draft blower load: 2.2FLA / 25LRA max @120Vac | Circulator load: 14.5FLA / 25LRA max @120Vac | Type of fan used with: Standard induction-type circulating fan