HVAC

Find by Part, Model or Description

Model, Part or Description

679

results

SDHH12ZB170picture of SDHH12ZB170
$26.69
IN STOCK
Supplying Demand HH12ZB170 HVAC Furnace Auto Limit Switch - Replaces 1NT23L-3643

Part Numbers

HH12ZB170, OEM15058550, AP3764637

SDHK06MB020picture of SDHK06MB020
$69.99
OUT OF STOCK
Supplying Demand HK06MB020 HVAC Furnace Dual Pressure Switch - Replaces HK06NB020

Part Numbers

SDHK06MB020

SD595063picture of SD595063
$12.99
IN STOCK
Supplying Demand 595063 HVAC Oil Burner Nozzle 0.85 GPH, 80 Degrees, Type B

Part Numbers

SD595063

SD595033picture of SD595033
$12.99
OUT OF STOCK
Supplying Demand 595033 HVAC Oil Burner Nozzle 0.75 GPH, 80 Degrees, Type B

Part Numbers

595033, OEM18575366, AP4643841

SDPCBBF112Spicture of SDPCBBF112S
$83.93
IN STOCK
Supplying Demand PCBBF112S HVAC Furnace Ignition PCB Replaces AP4366051

Part Numbers

PCBBF112S, OEM17464206, AP4366051

SDB1282628Spicture of SDB1282628S
$74.93
OUT OF STOCK
Supplying Demand B1282628S HVAC Furnace Gas Valve Assembly Replaces B1282614, B1282626

Part Numbers

B1282628S

SDHH12ZB180picture of SDHH12ZB180
$35.86
OUT OF STOCK
Supplying Demand HH12ZB180 HVAC L180-40 Auto Limit Switch for Furnace Fan 140-180F - Replaces 1NT23L-3644 and 1NT23L-7576

Part Numbers

HH12ZB180, OEM14166014, AP3541503

SDHH12ZB250picture of SDHH12ZB250
$29.99
IN STOCK
Supplying Demand HH12ZB250 HVAC Auto Limit Switch for Furnace Fan 210-250F - Replaces 1NT23L-3651

Part Numbers

SDHH12ZB250

SDHH18HA452_V1picture of SDHH18HA452_V1
$14.95
IN STOCK
Supplying Demand HH18HA452 HVAC Furnace Burner Roll-Out Limit Switch - 250 Degrees F

Part Numbers

SDHH18HA452_V1

SDK5895_V1picture of SDK5895_V1
$26.82
OUT OF STOCK
Supplying Demand K5895 HVAC Bathroom Exhaust Fan Motor Kit - Replaces SM140-40A, K5894

Part Numbers

SDK5895_V1

SDLA660003picture of SDLA660003
$20.89
OUT OF STOCK
Supplying Demand LA660003 HVAC Draft Inducer Cooling Fan with Retaining Ring for Blower Motor - Model Specific

Part Numbers

SDLA660003

SD0130M00140Spicture of SD0130M00140S
$38.88
IN STOCK
Supplying Demand 0130M00140S HVAC Transformer 120V to 24V 40VA 60Hz

Part Numbers

SD0130M00140S

SD0130M00105picture of SD0130M00105
$17.95
OUT OF STOCK
Supplying Demand 0130M00105 HVAC Defrost Thermostat Control 2 Wire - Replaces GDMB12-380

Part Numbers

SD0130M00105

SD0130F00504picture of SD0130F00504
$19.83
OUT OF STOCK
Supplying Demand 0130F00504 HVAC Furnace Pressure Switch Normally Open 0.60"

Part Numbers

SD0130F00504

SDD121picture of SDD121
$55.13
IN STOCK
Supplying Demand D121 HVAC Shaded Pole Motor for AC Fan Unit - Replaces 82121

Part Numbers

D121

SDRM292picture of SDRM292
$47.59
IN STOCK
Supplying Demand RM292V508 HVAC Small Float Valve for RM292 Series - Vertical & Horizontal 1/4 Compression Nut

Part Numbers

RM292

SDD120picture of SDD120
$55.13
IN STOCK
Supplying Demand D120 HVAC Shaded Pole Motor for AC Fan Unit - Replaces 82120, 9621

Part Numbers

D120

SDSW-ACRTCpicture of SDSW-ACRTC
$76.75
IN STOCK
This is a Supplying Demand lightweight tech bag that contains everything a technician needs to make an aluminum coil repair: - Al-Cop brazing rods 950-1000°F (510-537°C) - Alloy Sol aluminum repair and joining rods 600-700°F (315-371°C) - Alloy Sol Flux 650-1280°F (345-690°C) - Cleaning Rag - Durable canvas bag - Stainless Steel Wire Brush

Part Numbers

SDSW-ACRTC

SDSW-HB1picture of SDSW-HB1
$58.00
IN STOCK
This is Supplying Demand Heat Absorption Putty: Reusable - if it dries up, just add a little water and it recharges to new again

Part Numbers

SDSW-HB1

SDRT150Spicture of SDRT150S
$24.89
IN STOCK
This is Supplying Demand Gas Micro Leak Detector 1Qt - Detects micro leaks down to 0.79 oz/year, safe of any type of gas

Part Numbers

SDRT150S, RT150S, OEM15792666, AP3948166

SDRT410Spicture of SDRT410S
$29.12
IN STOCK
This is Supplying Demand Combustible Material Heat Blocking Gel 1Qt

Part Numbers

SDRT410S

SD326100-401picture of SD326100-401
$16.69
OUT OF STOCK
Supplying Demand 326100-401 HVAC Furnace Inducer Motor Blower Wheel Propeller

Part Numbers

326100-401

SD327263-401picture of SD327263-401
$16.53
IN STOCK
Supplying Demand 327263-401 HVAC Furnace Inducer Gasket

Part Numbers

327263-401

SDMUUMBpicture of SDMUUMB
$65.00
OUT OF STOCK
Supplying Demand MUUMB HVAC 60 Inch Adjustable Waterproof Umbrella - Umbrella Only

Part Numbers

MUUMB

SDMUBASEpicture of SDMUBASE
$58.64
IN STOCK
Supplying Demand MUBASE HVAC Base for 60 Inch Adjustable Waterproof Umbrella - Base Only

Part Numbers

MUBASE

SDHH18HA495picture of SDHH18HA495
$18.35
OUT OF STOCK
Supplying Demand HH18HA495 HVAC Furnace Limit Switch - Replaces AP3967831

Part Numbers

HH18HA495, OEM15871326, AP3967831

SDHH18HZ195picture of SDHH18HZ195
$34.64
OUT OF STOCK
Supplying Demand HH18HZ195 HVAC Furnace Limit Switch L195-80

Part Numbers

HH18HZ195

SDOT18-60Apicture of SDOT18-60A
$134.56
OUT OF STOCK
Supplying Demand OT18-60A HVAC Heat Pump Thermostat for Outdoor HVAC Use

Part Numbers

OT18-60A

SDTP-E25-3SP2picture of SDTP-E25-3SP2
$140.48
OUT OF STOCK
HVAC Direct Drive Blower Motor 1/4 HP 208/230V 1.6 Amp 1075 RPM 3-Speed 48Y Frame 10µF Capacitor Amps: 1.6 | Bearing Type: Self Aligning | Capacitor MFD µF: 10 | Cycle/Hertz: 60 Hz | Duty: Continuous | Full Load Amps: 1.6 | Insulation Class: B | Lead Length: 36" | Motor Enclosure: Open Air Over (OPAO) | Motor HP: 1/4 HP | Motor Type: PSC (Permanent Split Capacitor) | NEMA Frame: 48Y | Number of Bearings: 2 | Number of Poles: 6 | Number of Speeds: 3 (800, 950, 1075) | Phase: Single | Protection: Automatic | Rotation: Reversible | RPM: 1075 | Shaft Diameter: 0.5" (1/2") | Shaft Length: 5" | Voltage: 208-230 VAC

Part Numbers

TP-E25-3SP2

SDTP-E50-3SP2picture of SDTP-E50-3SP2
$166.74
IN STOCK
HVAC Direct Drive Blower Motor 1/2 HP 208/230V 2.7 Amp 1075 RPM 3-Speed 48Y Frame 10µF Capacitor Amps: 2.7 | Bearing Type: Self Aligning | Capacitor MFD µF: 10 | Cycle/Hertz: 60 Hz | Duty: Continuous (S1) | Full Load Amps: 2.7 | Insulation Class: B | Lead Length: 36" | Motor Enclosure: Open Air Over (OPAO) | Motor HP: 1/2 HP | Motor Type: PSC (Permanent Split Capacitor) | NEMA Frame: 48Y | Number of Bearings: 2 | Number of Poles: 6 | Number of Speeds: 3 (800, 950, 1075) | Phase: Single | Protection: Automatic | Rotation: Reversible | RPM: 1075 | Shaft Diameter: 0.5" (1/2") | Shaft Length: 5" | Thermal Protection: true | Voltage: 208-230 VAC

Part Numbers

TP-E50-3SP2

SDTP-E50-MHP1picture of SDTP-E50-MHP1
$177.56
IN STOCK
HVAC Direct Drive Blower Motor Multi-Horsepower 1/6 - 1/2 HP 115V 1075 RPM 3-Speed Amps: 7.3 | Bearing Type: Self Aligning (SAB) | Capacitor MFD µF: 10 | Cycle/Hertz: 60 Hz | Duty: Continuous (S1) | Full Load Amps: 7.3 | Insulation Class: B | Lead Length: 36" | Motor Enclosure: Open Air Over (OPAO) | Motor HP: 1/6 HP to 1/2 HP | Motor Type: PSC (Permanent Split Capacitor) | NEMA Frame: 48Y | Number of Bearings: 2 | Number of Poles: 6 | Number of Speeds: 4 (800, 950, 1075) | Phase: Single | Protection: Automatic | Rotation: Reversible | RPM: 1075 | Shaft Diameter: 0.5" (1/2") | Shaft Length: 4.4375 | Thermal Protection: true | Voltage: 115 VAC

Part Numbers

TP-E50-MHP1

SDTP-E75-MHP2picture of SDTP-E75-MHP2
$182.19
IN STOCK
HVAC Direct Drive Blower Motor 3/4 - 1/5 HP 208/230V 1075 RPM 3-Speed 48Y Frame 20MF 370 or 440V Capacitor Amps: 3.8 | Bearing Type: Ball | Capacitor MFD µF: 20 | Cycle/Hertz: 60 Hz | Duty: Continuous (S1) | Full Load Amps: 3.8 | Insulation Class: B | Lead Length: 36" | Motor Enclosure: Open Air Over (OPAO) | Motor HP: 3/4 HP | Motor Type: PSC (Permanent Split Capacitor) | NEMA Frame: 48Y | Number of Bearings: 2 | Number of Poles: 6 | Number of Speeds: 4 (800, 950, 1075) | Phase: Single | Protection: Automatic | Rotation: Counter Clockwise (CCW) | RPM: 1075 | Shaft Diameter: 0.5" (1/2") | Shaft Length: 5" | Thermal Protection: true | Voltage: 208-230 VAC

Part Numbers

TP-E75-MHP2

SDTP-E75-MHP1picture of SDTP-E75-MHP1
$208.45
OUT OF STOCK
HVAC Direct Drive Blower Motor 3/4 HP 115V 1075 RPM 3-Speed 48Y Frame 10MF 370 or 440V Capacitor Amps: 8.1 | Bearing Type: Ball | Capacitor MFD µF: 20 | Cycle/Hertz: 60 Hz | Duty: Continuous (S1) | Full Load Amps: 8.1 | Insulation Class: B | Lead Length: 36" | Motor Enclosure: Open Air Over (OPAO) | Motor HP: 3/4 HP | Motor Type: PSC (Permanent Split Capacitor) | NEMA Frame: 48Y | Number of Bearings: 2 | Number of Poles: 6 | Number of Speeds: 4 (800, 950, 1075) | Phase: Single | Protection: Automatic | Rotation: Counter Clockwise (CCW) | RPM: 1075 | Shaft Diameter: 0.5" (1/2") | Shaft Length: 5" | Thermal Protection: true | Voltage: 115 VAC

Part Numbers

TP-E75-MHP1

SD51-21964-11picture of SD51-21964-11
$500.95
IN STOCK
HVAC Vent Motor with Blades 208/230V motor with nominal 3000 rpm | Includes centrifugal proving switch | Mounting bolt pattern 4-1/4 inch x 4-1/4 inch | Includes three fan blades (3 inch, 3-1/2 inch, and 4 inch diameter)

Part Numbers

51-21964-11

SDDL1036picture of SDDL1036
$223.40
IN STOCK
HVAC Direct Drive Blower Motor 115V 1075 RPM 1/3 HP Phase: Single | Motor Design: Permanent Split Capacitor | HP: 1/3 | RPM: 1,075 | Number of Speeds: 3 | Voltage: 115V AC | Full Load Amps: 5 A | Frame: 48 | Usable @ 208V: No | Usable @ 200V: No | Motor Thermal Protection: Auto | Hz: 60 Hz | Ins. Class: B | Motor Shaft Rotation: CW/CCW | Max. Ambient Temperature: 40 °C | Lead Length: 26 in | Motor Enclosure Design: Open Air-Over | Motor Mounting Type: Ring | Motor Mounting Position: Horizontal | Number of Shafts: 1 | Motor Frame Material: Steel | Shaft Diameter: 1/2 in | Shaft Length: 4-1/2 in | Motor Bearings: Sleeve | Motor Shaft Design: Flat | Overall Length: 9-1/2 in | Length Less Shaft: 5-1/2 in | Mounting Holes: (4) #8-32 | Body Diameter: 5-5/8 in | Bolt Circle Diameter: 5-1/8 in | Stud Size: #8-32 | Ring to Ring Center: 5-1/16 in | Resilient Ring Diameter: 2-1/4 in | Capacitor Required: 2MDV6

Part Numbers

DL1036, OEM17314382, AP4328595

SDDL1056picture of SDDL1056
$272.95
IN STOCK
HVAC Direct Drive Blower Motor 115V 1075 RPM 1/2 HP Phase:Single | Motor Design: Permanent Split Capacitor | HP: 1/2 | RPM: 1,075 | Number of Speeds: 3 | Voltage: 115V AC | Full Load Amps: 7 A | Frame: 48 | Usable @ 208V: No | Usable @ 200V: No | Motor Thermal Protection: Auto | Hz: 60 Hz | Ins. Class: B | Motor Shaft Rotation: CW/CCW | Max. Ambient Temperature: 40 °C | Lead Length: 26 in | Motor Enclosure Design: Open Air-Over | Motor Mounting Type: Ring | Motor Mounting Position: Horizontal | Number of Shafts: 1 | Motor Frame Material: Steel | Shaft Diameter: 1/2 in | Shaft Length: 4-1/2 in | Motor Bearings: Sleeve | Motor Shaft Design: Flat | Overall Length: 10 in | Length Less Shaft: 6 in | Mounting Holes: (4) #8-32 | Body Diameter: 5-5/8 in | Bolt Circle Diameter: 5-1/8 in | Stud Size: #8-32 | Ring to Ring Center: 5-9/16 in | Resilient Ring Diameter: 2-1/4 in | Capacitor Required: 2MDV7

Part Numbers

DL1056, OEM17314114, AP4328528

SDD1026picture of SDD1026
$204.69
IN STOCK
HVAC Direct Drive Blower Motor 208-230V 1075 RPM 1/4 HP Phase: Single | Motor Design: Permanent Split Capacitor | HP: 1/4 | RPM: 1,075 | Number of Speeds: 3 | Voltage: 208-230V AC | Full Load Amps: 2 A | Frame: 48 | Usable @ 208V: Yes | Usable @ 200V: No | Motor Thermal Protection: Auto | Hz: 60 Hz | Ins. Class: B | Motor Shaft Rotation: CW/CCW | Max. Ambient Temperature: 40 °C | Lead Length: 26 in | Motor Enclosure Design: Open Air-Over | Motor Mounting Type: Ring | Motor Mounting Position: Horizontal | Number of Shafts: 1 | Motor Frame Material: Steel | Shaft Diameter: 1/2 in | Shaft Length: 4-1/2 in | Motor Bearings: Sleeve | Motor Shaft Design: Flat | Overall Length: 9-1/8 in | Length Less Shaft: 5-3/16 in | Mounting Holes: (4) #8-32 | Body Diameter: 5-5/8 in | Bolt Circle Diameter: 5-1/8 in | Stud Size: #8-32 | Ring to Ring Center: 4-11/16 in | Resilient Ring Diameter: 2-1/4 in | Capacitor Required: 2MDV4

Part Numbers

D1026

SDD1036picture of SDD1036
$211.67
IN STOCK
HVAC Direct Drive Blower Motor 208-230V 1075 RPM 1/3 HP Phase: Single | Motor Design: Permanent Split Capacitor | HP: 1/3 | RPM: 1,075 | Number of Speeds: 3 | Voltage: 208-230V AC | Full Load Amps: 2.1 A | Frame: 48 | Usable @ 208V: Yes | Usable @ 200V: No | Motor Thermal Protection: Auto | Hz: 60 Hz | Ins. Class: B | Motor Shaft Rotation: CW/CCW | Max. Ambient Temperature: 40 °C | Lead Length: 26 in | Motor Enclosure Design: Open Air-Over | Motor Mounting Type: Ring | Motor Mounting Position: Horizontal | Number of Shafts: 1 | Motor Frame Material: Steel | Shaft Diameter: 1/2 in | Shaft Length: 4-1/2 in | Motor Bearings: Sleeve | Motor Shaft Design: Flat | Overall Length: 9-3/8 in | Length Less Shaft: 5-3/8 in | Mounting Holes: (4) #8-32 | Body Diameter: 5-5/8 in | Bolt Circle Diameter: 5-1/8 in | Stud Size: #8-32 | Ring to Ring Center: 4-15/16 in | Resilient Ring Diameter: 2-1/4 in | Capacitor Required: 2MDV4

Part Numbers

D1036, TJD1036, AP5639821

SDD1056picture of SDD1056
$282.95
IN STOCK
HVAC Direct Drive Blower Motor 208-230V 1075 RPM 1/2 HP Phase: Single | Motor Design: Permanent Split Capacitor | HP: 1/2 | RPM: 1,075 | Number of Speeds: 3 | Voltage: 208-230V AC | Full Load Amps: 3.6 A | Frame: 48 | Usable @ 208V: Yes | Usable @ 200V: No | Motor Thermal Protection: Auto | Hz: 60 Hz | Ins. Class: B | Motor Shaft Rotation: CW/CCW | Max. Ambient Temperature: 40 °C | Lead Length: 26 in | Motor Enclosure Design: Open Air-Over | Motor Mounting Type: Ring | Motor Mounting Position: Horizontal | Number of Shafts: 1 | Motor Frame Material: Steel | Shaft Diameter: 1/2 in | Shaft Length: 4-1/2 in | Motor Bearings: Sleeve | Motor Shaft Design: Flat | Overall Length: 9-7/8 in | Length Less Shaft: 5-7/8 in | Mounting Holes: (4) #8-32 | Body Diameter: 5-5/8 in | Bolt Circle Diameter: 5-1/8 in | Stud Size: #8-32 | Ring to Ring Center: 5-7/16 in | Resilient Ring Diameter: 2-1/4 in | Capacitor Required: 2MDV6

Part Numbers

D1056

SDD1076picture of SDD1076
$323.95
IN STOCK
HVAC Direct Drive Blower Motor 208-230V 1075 RPM 3/4 HP Phase: Single | Motor Design: Permanent Split Capacitor | HP: 3/4 | RPM: 1,075 | Number of Speeds: 3 | Voltage: 208-230V AC | Full Load Amps: 5.1 A | Frame: 48 | Usable @ 208V: Yes | Usable @ 200V: No | Motor Thermal Protection: Auto | Hz: 60 Hz | Ins. Class: B | Motor Shaft Rotation: CW/CCW | Max. Ambient Temperature: 40 °C | Lead Length: 26 in | Motor Enclosure Design: Open Air-Over | Motor Mounting Type: Ring | Motor Mounting Position: Horizontal | Number of Shafts: 1 | Motor Frame Material: Steel | Shaft Diameter: 1/2 in | Shaft Length: 4-1/2 in | Motor Bearings: Sleeve | Motor Shaft Design: Flat | Overall Length: 10-5/8 in | Length Less Shaft: 6-9/16 in | Mounting Holes: (4) #8-32 | Body Diameter 5-5/8 in | Bolt Circle Diameter: 5-1/8 in | Stud Size: #8-32 | Ring to Ring Center: 6-3/16 in | Resilient Ring Diameter: 2-1/4 in | Capacitor Required: 2MDV7

Part Numbers

D1076, OEM17310862, AP4327715